How to make a Local area network using Ethernet Adapter and Just 2 wires (Single Pair) is it possible?

How to make a Local area network using Ethernet Adapter and Just 2 wires (Single Pair) is it possible? To make it for using TCP/IP services?How to make a Local area network using Ethernet Adapter and Just 2 wires (Single Pair) is it possible?
NOT POSSIBLE. Ethernet uses a minimum of 4 wires, but is normally arranged with 8 wires.





You see, Ethernet uses SEND and RECEIVE pairs of wires. There is no way around this. PERIOD.





You can get convertors for 10BASE2 (also known as cheapernet, thin Ethernet, thinnet, thinwire or quite simply Thinnies). But this requires that you use a COAX cable that costs even more. It is slower and less reliable.





Good luck. How to make a Local area network using Ethernet Adapter and Just 2 wires (Single Pair) is it possible?
No it is not possible. If you want to make a local area network using your ethernet adapters you need 4 wires (two pairs).


In a network CAT 5E cable you`ll find 8 wires (4 pairs) but only 4 wires (2 pairs) are needed to make a connection and of course 2 RJ45 connectors

fast cash

mr skin